“1인 1실습 NCS전용 장비 제공으로 실무 중심의 교육환경 구성" 한컴MDS 아카데미의 교육과정은 학습한 내용을 바로 실무에 적용할 수 있도록 실제 업무에서 사용되는 타겟 보드와 디버거 등을 사용합니다.
수강생이 불편함 없이 실습할 수 있도록 Firmware, WinCE, Linux 등 개발에 필요한 다양한 환경을 제공하며 실무에 바로 투입 가능한 전문 인력을 양성하기 위해 수강생 한 명당 하나의 실습장비를 제공합니다.
교육 실습환경 구축 및 컨설팅
수강생들의 원활한 실습을 위해 Target Board를 자체 개발하고, 실습에 필요한 BSP, 디바이스 드라이버, 예제 프로그램 등도 직접 개발하여 실무 교육에 이용하고 있습니다.
Smart Factory & IoT Platform Model (교육/개발/컨설팅)
기업이 Cloud, Big Data와 임베디드를 융합한 새로운 솔루션으로 업무의 효율성과 생산성을 높이는 기술을 구현할 수 있도록 Smart Factory 관련 교육 및 개발, 컨설팅 서비스를 지원합니다.
GPU 기반 Hadoop Cluster 개발 장비 (빅데이터 병렬/분산처리 장비)
Application Processor : Tegra K1 Processo, 23x23mm, 0.7mm Pitch, CPU x 4개, Tegra K1 4 CPU 기준 1 TFLOPS
Switching Hub: 8포트 10/100/1000Mbps Ethernet Port / Low Energy / AUTO MDI&MDI-X
인증: FCC, CE, RoHS, KC
IoT 게이트웨이 보드 (ARMv8 8-Core)
SoC : Rockchip RK3368 octa core Cortex A53 processor with PowerVR G6110 GPU with support for OpenGL ES 1.x/2.0/3.x, OpenGL 3.2, DirectX 9.3, OpenCL 1.2 EP, and Renderscript
System Memory : 1 or 2 GB RAM
Storage : 8 to 16 GB eMMC flash
Video Output : HDMI, composite RCA
Audio Output : HDMI, stereo RCA
Connectivity : Ethernet, Wi-Fi 802.11 b/g/n, Bluetooth 4.0
USB : 1x USB host port, 1x USB OTG port (full size)
Debug : JTAG enabled
Dimensions : 188 x 115 x 34 mm
Android 5.x / Ubuntu 14.x / kernel : Linux 3.10.x
Wireless Smart Sensor board (WIFI, NFC)
Low Energy WIFI Solution(Same as BLE)
Support IEEE 802.11 b/g/n Standard
One Transmit and one Receive path (1T1R)
Frequency range : 2.412GHz ~ 2.484GHz
ARM® Cortex®-M3 Core
CPU Clock : 166MHz
Memory capacity : 1MB of ROM, 2MB of Flash, 496kB of SRAM
Operating Voltage : DV 3.3V
Other interface : UART, JTAG, I2S, I2C, SPI, SDIO, GPIO, USB 2.0 Host/Slave, PWM, ADC (Arduino Compatible)
NFC Tag
mbed Enabled
RoHS Compliant
Arduino IDE
IoT Based 3D Printer For Smart Factory (Customizable)
프린팅 방식 : FFF(Fused Filament Fabrication)
조형물 크기 : 100mm X 100mm X 100mm
필라멘트 : PLA
노즐직경 : 0.4mm/0.8mm (기본 0.8mm)
적층두계 : 0.05mm ~ 0.5mm
메인보드 : MEGA 2560
LCD : 16 X 2 라인
전원부 : 100~240V, 150W
Iot Agent : &Cube Enabled
* 다양한 종류의 3D 프린터를 주문제작 가능
FLIR IR Camera for Smart Factory
Support for the EthernetIP field bus protocol (analyze, alarm, and simple camera control)
Support for the Modbus TCP field bus protocol (analyze, alarm, and simple camera control)
Built-in analysis functionality.
Alarm functionality, as a function of analysis and more.
Built-in web server for control and set up.
MJPEG, MPEG-4, or H.264 image streaming.
PoE (Power over Ethernet).
General-purpose output.
100 Mbps Ethernet (100 m cable).
On alarm: file sending (FTP) or e-mail (SMTP) of analysis results or images.
IoT Training Kit
SoC : 22-nm Intel® SoC that includes a dual-core, dualthreaded Intel® AtomTM CPU at 500Mhz and a 32-bit Intel® QuarkTM microcontroller at 100 MHz
WiFi : Broadcom* 43340 802.11 a/b/g/n, Dual-band (2.4 and 5 GHz) On board antenna or external antenna SKU configurations
Bluetooth 4.0
NUCLEO-F103RB
Moisture Sensor / Analog Rotation Sensor / PIR (Motion) Sensor / Analog Sound Sensor / Analog Linear Temperature Sensor / Analog Ambient Light Sensor / Capacitive Touch Sensor / Flame sensor
Connects to 802.11ac Wi-Fi and Bluetooth enabled devices
10/100/1000BASE-T Ethernet
JETSON CAMERA module : 5 MP Fixed Focus MIPI CSI Camera
BUTTONS : Power On/Off/Reset/Force Recovery/User-Defined
POWER OPTIONS /
I/O : USB 3.0 Type A / USB 2.0 Micro AB (supports recovery and host mode)
HDMI / M.2 Key E / PCI-E x4 / Gigabit Ethernet / Full-Size SD / SATA Data and Power / GPIOs, I2C, I2S, SPI* / TTL UART with Flow Control Display Expansion Header* / Camera Expansion Header
멀티코어 AURIX 기반 3상 PMSM/BLDC 모터보드
TC234 Application Kit with TFT Display incl. safety supply TLF35584
eMotor PowerBoard
Driving of a 3 Phase PMSM/BLCD (12Volt/max. 50Watt) with TLE9180
Sensing of Motor Position with Resolver, Encoder or Hall Sensor
Phase Current Measurement with DC Link Shunt / 2/3 Shunts in Ground Path
Configuration / Diagnostic via SPI
eMotor Drive Kit fits perfectly to Application TC2x4
Low Power Status LED / Dimension: 100mm x 120mm
BLDC Motor from Nanotec : 17V / 3,57A (40W)
Field oriented control algorithms
PWM generation with space vector control
Open/Closed loop mode
차량용 24Ghz Radar 보드
24GHz range-Doppler radar system for blind spot detection
TC264DA microcontroller for sampling and signal processing of the analog signals on-board
BGT24ATR12 24GHz radar IC
Range measurement / Speed measurement relative to car
Angle of arrival measurement
RCS measurement / 20 measurememts / second update rate
Outputs via 100 Mbit/s ethernet or CAN
Target list with up to 32 targets or sampled raw data
System form factor close to production: 140 x 80 x 15 mm including Tx and Rx antennas
HEV을 위한 배터리 관리 보드
Automotive qualified IGBT module HybridPACK™ - 1650V/400A IGBT & Diode chip set Automotive qualified Driver IC 1ED020I12-FA - Based on coreless transformer technology
Up to 1200 V and 2A driving capability - VCE sat - detection
TriCore™ family 32-bit microcontroller TC1767: member of the AUDO FUTURE product family designed for automotive applications
Possibility of different motor position interfaces: encoder, resolver and GMR (Giant Magneto resistance)
The HybridKIT for HybridPACK™ 1 includes
Six channel IGBT driver board: EVAL-6ED100HP1-FA, Logic Board, HybridPACK™ 1 power module
교육용 임베디드 실습 보드
현업에 적용 가능한 실습중심의 교육을 위해 관련 보드를 개발하여 교육을 운영하고 있습니다.
Cortex-A15(Dual) Board 제품명: MEP-V5250(MV5250)
삼성 Exynos5250 Cortex A15 Dual main Processor
LPDDR2 2GB(POP type) Memory
LVDS, LCD(1024x600) with Capacitive Touchscreen
Media Tek-MT6620(WIFI/GPS/BT/ FM
Tx-Rx SEMCO S5K4ECGX(5M Pixel) 카메라/ HDMI 출력
Connector type(AsahiKASEI AK4953) Audio/ 1 Port RS232 Level Uart Port Micro SD 1Slot, eMMC Storage
1ea 20pin JTAG Connector/ USB 2.0 Device/ USB 3.0 Device/ 100Mbps Ethernet Port/ USB Hub
